Appendix B – Printer Control Codes
72 6824 Mobile Full Page Printer User Manual
Master Select
Allows you to specify a combination of print modes. The value for n is determined
by adding up the values for the desired modes.
The next table lists hex values for the print modes. Add the values for the desired
modes to determine the value for
n.
For example, to create a combination of Pica Compressed Italic Underlined, add
the values for those modes as follows:
00h + 04h + 40h + 80h = C4h
Thus, the value for
n is C4h.
The following print conflicts occur between modes. A mode in any column takes
precedence over all modes in the columns to its right.
Decimal: 27 45 1*
Hex: 1B 2D 01*
ASCII: ESC “-” 1*
Select Underline Mode (continued)
Cancel Underline Mode
Description: Cancels underline mode.
Decimal: 27 45 0*
Hex: 1B 2D 00*
ASCII: ESC “-” 0*
Format
Decimal Hex ASCII
27 33 n 1B 21 n ESC “!” n
Mode Values for Master Select Control Code
Mode Hex Value
Pica 00h
Elite 01h
Condensed (compressed) 04h
Emphasized 08h
Double-Strike 10h
Double-Width (expanded) 20h
Italic 40h
Underlined 80h
To Next Page
Loading...
