Appendix A – Specifications and Command Lists
6824 Mobile Full Page Printer User Manual 51
Default Settings
Factory Default Settings
Setting Default
Carraige position At left margin
Character set Normal (not user-defined)
Code page 437
Codes 128-255 Disabled
Condensed (compressed) Disabled
Double-strike Disabled
Double-wide Disabled
Emphasized Disabled
Graphics mode Not selected
Half-speed printing Disabled
Intercharacter space Zero (0)
Italic Disabled
Justification Left
Keyboard, printer Enabled
Language U.S.A.
Line spacing 1/6 inch
Margin, left 0
Margin, right 80
MSB control Disabled
LQ Disabled
Page length 11 inches (66 lines with Pica pitch)
Paper end sensor Disabled
Pitch Pica (10 characters per inch)
Power off sleep timer 5 minutes
Printer Code Area Expansion Disabled
Printing direction Top-down, bidirectional
Redefinition of graphic modes Disabled
Skip over perforation Disabled
Subscript/superscript Disabled
Tabs, horizontal Every 8 columns
Tabs, vertical 1 line feed per tab, channel 0
Top of form Set to the top line
Underline Disabled
Unidirectional printing Disabled
User-defined character set Removed
Zero print option Zeros printed without a slash
Auto Feed configuration CR added at end of line without LF
Protocol XON/XOFF
To Next Page
Loading...
Need help?
General