Chapter 2 – Set Up the Printer
6824 Mobile Full Page Printer User Manual 15
Adjust the Pinfeed Holders
By default, the printer pinfeed holders are set for 8.5” paper stock. Follow these
steps to adjust the pinfeed holders for different paper widths.
1 Locate the locking tab on the pinfeed holder.
2 Lift the tab to unlock it. You should hear a click sound.
3 Slide the pinfeed holder left or right as needed to fit your paper.
4 Press the tab down to lock the holder in place.
5 Load the paper.
To Next Page
Loading...
