Honeywell CentraLine EAGLEHAWK NX - Navigating through Menus, Sub Menus, Lists and Highlighting Items; Selecting Items

BASIC OPERATION PROCEDURES EAGLEHAWK NX CONTROLLER
EN2Z-1053GE51 R0119 18
3. Use the rotate&push button to navigate to and highlight the sub menu.
4. Push the rotate&push button. The sub menu is displayed.
Navigating through Menus, Sub Menus, Lists and Highlighting Items
When navigating through menus, and lists by turning the rotate&push button, the list
items are automatically highlighted while turning the rotate&push button clockwise or
counterclockwise.
Fig. 5. Navigating / Highlighting Items in the Schedule menu
Selecting Items
Selecting items is done by pushing the rotate&push button on a highlighted
item. Dependig on the highlighted item, the resulting action can be different.
Selecting Menu, Sub Menu
and List Items Pushing the rotate&push button on highlighted menus and list items, typically
branches off into further information such as sub menus, e.g., Station Point List of
the General menu.