Honeywell CentraLine EAGLEHAWK NX - Deleting Switch Point

EAGLEHAWK NX CONTROLLER EVERYDAY OPERATIONS
71 EN2Z-1053GE51 R0119
11. Turn the rotate&push button to navigate to and highlight the OK command.
12. Push the rotate&push button.
The screen of the day redisplays showing the changed switch point.
Deleting Switch Point
Purpose Delete a switch point.
Procedure
1. On the controller housing, press the Time Program operating key
. The
TIME PROGRAMS menu displays.
2. Turn the rotate&push button to navigate to and highlight Schedules.
3. Push the rotate&push button. The Schedule List screen is displayed.
4. Turn the rotate&push button to navigate to and highlight the schedule.
5. Push the rotate&push button.
The schedule is displayed.
6. Turn the rotate&push button to navigate to and highlight the day.