Honeywell CentraLine EAGLEHAWK NX - Setting Watchdog

EAGLEHAWK NX CONTROLLER EVERYDAY OPERATIONS
53 EN2Z-1053GE51 R0119
7. Navigate to the OK command and press the button to leave the SETTINGS
menu.
Setting Watchdog
Purpose Sets the watchdog timer.
Procedure
1. In the HOME screen, turn the rotate&push button to navigate to and highlight
the General menu icon
.
2. Then push the rotate&push button. The General menu is displayed.
3. Turn the rotate&push button to navigate to and highlight Controller Settings.
4. Push the rotate&push button. The SETTINGS menu menu is displayed.
5. Turn the rotate&push button to navigate to and highlight Watchdog.
The WATCHDOG SETTINGS screen is displayed. The current setting is
selected.
^
6. To select another option, push the rotate&push button.