EVERYDAY OPERATIONS EAGLEHAWK NX CONTROLLER
EN2Z-1053GE51 R0119 72
7. Push the rotate&push button.
The day with its switch points is displayed.
8. Turn the rotate&push button to navigate to and highlight the switch point you
want to delete.
9. On the controller housing, press the soft key right adjacent to the Delete
command symbol
.
The Delete Switchpoint screen is displayed.
10. Push the rotate&push button.
11. The switch point is deleted and the screen of the day redisplays.
Editing Special Event
As the schedule itself, special events include switch points that switch a datapoint
property. Initially, special events are created in the CentraLine NX workbench and
downloaded in the controller.
Purpose In the controller, you can edit the special event by doing one of the following:
Creation of new switch points
Edition, copy and deletion of existing switch points
NOTE: In the controller, you cannot:
change the name of a schedule
create new schedules
Procedure
1. On the controller housing, press the Time Program operating key
. The
TIME PROGRAMS menu displays.
2. Turn the rotate&push button to navigate to and highlight Schedules.
To Next Page
Loading...
