Honeywell CentraLine EAGLEHAWK NX - Deleting Items

BASIC OPERATION PROCEDURES EAGLEHAWK NX CONTROLLER
EN2Z-1053GE51 R0119 30
8. Press the soft key adjacent to the Copy command symbol
.
The Copy day screen displays. The All option is highlighted.
9. If you want to select all days, push the rotate&push button.
10. If you want to select particular days, turn the rotate&push button to navigate
to and highlight the day.
11. Push the rotate&push button.
The selected day is enabled.
12. Enable further days if desired.
13. Turn the rotate&push button to navigate to and highlight the OK command at
the bottom of the screen.
14. Push the rotate&push button.
In this example, switch points of Tuesday are copied to all days.
Deleting Items
At appropriate spots, items can be deleted. Items which can be deleted, are
indicated by the Delete command symbol:
Delete
Item can be deleted
Example Delete a calendar entry.
1. In the Calendar menu, turn the rotate&push button to navigate to and
highlight the entry.
2. To delete the entry, press the soft key adjacent to the Delete command
symbol
.