Honeywell CentraLine EAGLEHAWK NX - Editing Calendar Date

EVERYDAY OPERATIONS EAGLEHAWK NX CONTROLLER
EN2Z-1053GE51 R0119 62
Each criteria offers an Any selection, in addition to a specific selection. In
addition, the following criteria offer additional selections, as follows:
– day-of-month
 Last day
 Last 7 days
– week-in-month
 Last 7 days
Within any criteria, selections are “OR”ed” The overall result is from
“AND’ing” all criteria.
Example: See the following figures.
23. Turn the rotate&push button to navigate to and highlight the OK command.
24. Push the rotate&push button to save settings.
Editing Calendar Date
Purpose Edit the name and/or the settings of a calendar date.
Procedure
1. On the controller housing, press the time program operating key
. The
TIME PROGRAMS menu displays.
◌
ࣲ