EAGLEHAWK NX CONTROLLER BASIC OPERATION PROCEDURES
19 EN2Z-1053GE51 R0119
Selecting Values and Options Pushing the rotate&push button on a highlighted value or option is the first step for
adjusting values and options. For details, please refer to the subsequent “Adjusting
and Saving Values and Options” section, p. 19.
Value Example: Selecting and adjusting the time of a switch point
Options Example: Selecting and adjusting the watchdog.
^
Adjusting and Saving Values and Options
Values are adjustable values such as the temperature of an analog point, the state
of a binary point (0-1, ON-OFF), or the time of a switch point in a schedule.
Adjusting and Saving Values Example: Adjusting and saving the time and the value of an analog switch point
1. On the controller housing, press the time program operating key
.
The TIME PROGRAMS menu displays.
2. Turn the rotate&push button to navigate to and highlight Schedules.
To Next Page
Loading...
