BASIC OPERATION PROCEDURES EAGLEHAWK NX CONTROLLER
EN2Z-1053GE51 R0119 20
3. Push the rotate&push button.
The Schedule List menu displays.
4. Turn the rotate&push button to navigate to and highlight the schedule.
5. Push the rotate&push button. The days of the schedule are displayed.
6. Turn the rotate&push button to navigate to and highlight the day.
7. Then push the rotate&push button. The switch points with time and value are
displayed. Here you can add new switch points and copy switch points using
command symbols and soft keys.
To add a new switch point, please refer to the "Adding Items to a List"
section, p. 28. To copy a switch point, please refer to the "Copying Items"
section, p. 29.
8. Turn the rotate&push button to navigate to and highlight the line you want to
edit.
9. Then push the rotate&push button.
The Edit screen displays. The time is highlighted.
10. Push the rotate&push button.
The hours field is flashing.
To Next Page
Loading...
