EVERYDAY OPERATIONS EAGLEHAWK NX CONTROLLER
EN2Z-1053GE51 R0119 56
1. In the HOME screen, turn the rotate&push button to navigate to and highlight
the General menu icon
.
2. Then push the rotate&push button. The General menu is displayed.
3. Turn the rotate&push button to navigate to and highlight Information.
4. Push the rotate&push button.
The INFORMATION screen is displayed.
5. View the information by turning the rotate&push button.
6. Press the Back operating key
on the controller housing twice to leave the
INFORMATION screen and display the HOME menu.
TIME PROGRAMS
Calendars and Schedules Time programs consist of calendars and schedules.
A calendar includes a list of dates. Initially, calendars are created in the CentraLine
NX workbench and downloaded in the controller.
In the controller, you can edit the calendar by doing one of the following:
Addition of new calendar dates
Edition and deletion of existing calendar dates
NOTE: You cannot change the name of a calendar and/or create new calendars
in the controller.
A schedule includes switch points that switch a datapoint property.
In the controller, you can edit the schedule by doing one of the following:
Creation of new switch points
Edition, copy and deletion of existing switch points
Edition of special events
Set and edition of general properties (period, default value)
NOTE: You cannot change the name of a schedule and/or create new schedules.
Time programs can be changed by doing any of the following:
changing time and value of switch points
To Next Page
Loading...
