BASIC OPERATION PROCEDURES EAGLEHAWK NX CONTROLLER
EN2Z-1053GE51 R0119 32
d. Turn the rotate&push button to navigate through the first line of the
characters library and highlight the character.
e. Push the rotate&push button.
The character is added to the title line.
f. To scroll through the lines of the character library including capitals,
lower case characters, numbers, and special signs, press the soft key
adjacent to the Scroll command symbol
. Then select and add the
desired character in the same way as described above.
g. If wrong characters have been added, they can be deleted at any time
by using the soft key adjacent to the Delete command symbol
.
h. After completing the title line, press the soft key adjacent to the Toggle
command symbol
. The cursor jumps back into the title line.
3. Push the rotate&push button.
The new entry is saved and added to the Calendar List menu.
Scrolling through Calendar
When creating a calendar, in the second part, the date(s) for the calendar type
(specific date, date range, week and day, custom) can be selected by scrolling
through a calendar.
Scroll forward
Scrolls forward through a calendar on monthly basis
Scroll backward
Scrolls backward through a calendar on monthly basis
Today
Selects the current date in a calendar
Example Select date for a calendar of type ´Date`.
1. On the controller housing, press the time program operating key
. The
TIME PROGRAMS menu displays.
To Next Page
Loading...
