EAGLEHAWK NX CONTROLLER BASIC OPERATION PROCEDURES
33 EN2Z-1053GE51 R0119
2. Turn the rotate&push button to navigate to and highlight Calendars.
3. Push the rotate&push button. The Calendar List menu is displayed.
4. Turn the rotate&push button to navigate to and highlight the calendar.
5. Push the rotate&push button. The Calendar menu is displayed showing all
calendar entries.
6. Turn the rotate&push button to navigate to and highlight, e.g. Date.
7. Push the rotate&push button. The following screen displays.
8. Turn the rotate&push button to navigate to and highlight Date. Then, push
the rotate&push button
9. The following screen displays. The current date is highlighted.
10. Select a date by doing any of the following:
a. Scroll through the actual month on a daily basis by turning the
rotate&push button.
b. Scroll through the calendar on a monthly basis using the corresponding
command symbols with soft keys:
To Next Page
Loading...
