EAGLEHAWK NX CONTROLLER EVERYDAY OPERATIONS
73 EN2Z-1053GE51 R0119
3. Push the rotate&push button. The Schedule List screen is displayed.
4. Turn the rotate&push button to navigate to and highlight the schedule to
which you want to add switch points.
5. Push the rotate&push button.
The schedule is displayed.
6. Press the soft key adjacent to the Special events command symbol
.
The Special Events menu is displayed.
7. Turn the rotate&push button to navigate to and highlight the special event
you want to edit.
8. Push the rotate&push button.
The switch points of the special event are displayed.
Do any or many of the following:
– create new switch points (see "Adding Switch Point" section, p. 66)
– edit switch points (see "Editing Switch Point" section, p. 69)
TROUBLESHOOTING
To Next Page
Loading...
