Honeywell CentraLine EAGLEHAWK NX - Copying Items

EAGLEHAWK NX CONTROLLER BASIC OPERATION PROCEDURES
29 EN2Z-1053GE51 R0119
finishing the creation/edition of the title line, the new calendar is added to
the Calendar menu.
8. To set the properties for the calendar entry, push the rotate&push button on
the highlighted entry, and enter the properties as described in “Adjusting and
Saving Values and Options” section, p. 19.
Copying Items
At appropriate spots, lists can be extended by copying existing items within the list.
Copy
Item can be copied
Example Copying all switch points from one day to another day.
1. On the controller housing, press the time program operating key
.
The TIME PROGRAMS menu displays.
2. Turn the rotate&push button to navigate to and highlight Schedules.
3. Push the rotate&push button.
The Schedule List menu displays.
4. Turn the rotate&push button to navigate to and highlight the schedule.
5. Push the rotate&push button. The days of the schedule are displayed.
6. Turn the rotate&push button to navigate to and highlight the day.
7. Then push the rotate&push button. The switch points with time and value are
displayed.