Programming Mode
2 - 4 Model 1010 Application Pack CB Part No.: 4418024 - Rev. 1
Programming Manual
2.5 Menu System
The Configuration Menu for the 1010 instrument consists of the Main
Menus described in the following table. Each menu is described in detail
in CHAPTER 3 through to CHAPTER 9.
The following diagram shows the detailed menu structure for a four-arm
instrument.
Table 2-2: Menu System
Main Menu Purpose
Display Contrast Configures the display to provide optimum visibility based on
ambient lighting
System Configures the system operating parameters
Loading Arms Configures loading arm details such as arm name and additive
recipe
Metering Lines Configures operating parameters relating to metering lines flow
meters, temperature probes, products and other parameters
Product Streams Configures product streams for different valve settings, no flow
timeout, Deadband, etc
Additive Lines Configures additive injector systems
Recipes Configures recipes such as additive quantities and blend
percentage.
MAIN MENU
6 - ADDITIVE LINES
7 - RECIPES
1 - DISPLAY CONTRAST
2 - SYSTEM
3 - LOADING ARMS
PRESS ENTER TO SELECT
1 - DISPLAY CONTRAST
MAIN MENU
6 - ADDITIVE LINES
7 - RECIPES
1 - DISPLAY CONTRAST
2 - SYSTEM
3 - LOADING ARMS
PRESS ENTER TO SELECT
1 - DISPLAY CONTRAST
To Next Page
Loading...
