3 - 1 Model 1010 Application Pack CB Part No.: 4418024 - Rev. 1
Programming Manual
CHAPTER 3 DISPLAY CONTRAST (1)
3.1 Description
Use the Display Contrast menu to adjust display contrast for obtaining
the best view.
Use the Display key to decrease contrast of the LCD, and the Arm key
to increase it.
Set the display contrast of the instrument to suit an average height
operator.
Press and hold the START key for 10 seconds to set the display to the
factory default value of 32.
Select a value in the following range:
1 – 64 (32*)
DISPLAY CONTRAST 1
ADJUST DISPLAY
CONTRAST: 32
DISPLAY CONTRAST 1
ADJUST DISPLAY
CONTRAST: 32
To Next Page
Loading...
