Honeywell Enraf 1010 CB - Navigating in Authorisation Entry Mode; Edit IDs; Erase ID Bank; Search for an ID

Authorisation Entry Mode
10 - 3 Model 1010 Application Pack CB Part No.: 4418024 - Rev. 1
Programming Manual
The Authorisation sub-menus found in the instrument are as follows:
1 - Edit ID’s
Allows for the entry or editing of personnel and vehicle IDs. For more
information, see "Navigating in Authorisation Entry Mode" on page 10-4.
2 - Erase ID Bank
Allows for the bulk erasure of groups (master, vehicle or personnel) IDs
See section 10.3.2.
3 - Search for an ID
Allows the operator to search for an ID. For more information, see
section 10.3.3
4 - Retrieve an ID
Allows the operator to search against an index number and so retrieve
the ID. For more information, see section 10.3.4
5 - Edit Master IDs
Allows for the Entry or Editing of Master IDs. For more information, see
section 10.3.5.
AUTHORISATION MENU
4
– RETRIEVE AN ID
5
– EDIT MASTER ID‘S
-CON
2
– ERASE ID BANK
3
– SEARCH FOR AN ID
PRESS ENTER TO SELECT
1 – EDIT ID‘S
AUTHORISATION MENU
4
– RETRIEVE AN ID
5
– EDIT MASTER ID‘S
-CON
2
– ERASE ID BANK
3
– SEARCH FOR AN ID
PRESS ENTER TO SELECT
1 – EDIT ID‘S