Honeywell Enraf 1010 CB - 4.9 Opto Outputs (28)

System (2)
4 - 29 Model 1010 Application Pack CB Part No.: 4418024 - Rev. 1
Programming Manual
SYSTEM INPUT n After selecting a system input from the SYSTEM MESSAGES menu,
instrument displays the following screen.
This screen allows selection of an entry from a list of choices. Scroll
through list using the DISPLAY key. The list contains standard and fixed
messages.
Select one of the following options:
 Standard*
 Vapour System
 Valve Position
 Additive Alarm
 Arm Park
 Arm Position
4.8.7 Arm Messages
Use the ARM MESSAGES sub-menu to select a message from either
the fixed or standard message list for that arm input.
Select one of the following options:
 Arm Input 1
 Arm Input 2
 Arm Input 3
 Arm Input 4
 Arm Input 5
 Arm Input 6
 Arm Input 7
 Arm Input 8
GENERAL SETUP
21
-
-
BAY
NUMBER
1-
-
ARM
S
PRESS ENTER TO
SELECT
SYSTEM INPUT 1 27
(STANDARD)
SYSTEM INPUT 1