9 - 1 Model 1010 Application Pack CB Part No.: 4418024 - Rev. 1
Programming Manual
CHAPTER 9 RECIPES (7)
9.1 Description
Use the Additive Recipe sub-menu to set the number, name, and the
amount of additive associated with the selected loading arm.
9.2 CONFIGURE RECIPE (7)
Select Recipe n Use to select and edit up to 16 additive recipes.
Enter a value in the following range:
Recipe 1 to Recipe 16
Edit Recipe Name Use to enter a 12 digit alphanumeric identifier for each recipe
12 Digit alphanumeric
Enable Recipe n Use to enable or disable a recipe.
Select one of the following options:
Enable
Disable*
Associated Loading
Arm
Use to enter the arm number to which particular recipe will be assigned.
Enter a value in the following range:
First arm number to max available arm (First arm number*)
NOTE: The Summary page will display the arm number along with arm type.
Target Blend
Percentage
Use to enter the target blend percentage for the arm.
RECIPES 7
- RECIPE 15
- RECIPE 16
- CON
- RECIPE 2
- RECIPE 3
PRESS ENTER TO SELECT
- RECIPR 1
RECIPES 7
- RECIPE 15
- RECIPE 16
- CON
- RECIPE 2
- RECIPE 3
PRESS ENTER TO SELECT
- RECIPE 1
To Next Page
Loading...
