Honeywell Enraf 1010 CB - CHAPTER 5 LOADING ARMS (3); 5.1 Description; 5.2 Configure Arm n (3 n)

5 - 1 Model 1010 Application Pack CB Part No.: 4418024 - Rev. 1
Programming Manual
CHAPTER 5 LOADING ARMS (3)
5.1 Description
From the Loading Arms menu you can select an available loading arm
to configure. You can program general parameters relating to the arm
such as Product Name, Additive Setup, and Additive Recipe, or you can
enable or disable the arm.
The maximum number of arms available with the instrument depends
on the sales code.
5.2 Configure Arm n (3n)
5.2.1 Description
Use the CONFIGURE LOADING ARM menu to enter the general
parameters related to the arm such as Name, Additive Setup, Flow
control, and Alarm setup for the arm. You can also enable or disable the
arm.
LOADING ARMS 3
4 - CONFIGURE ARM4
1 - CON
2 - CONFIGURE ARM 2
3 - CONFIGURE ARM 3
PRESS ENTER TO SELECT
1 - CONFIGURE ARM 1
LOADING ARMS 3
4 - CONFIGURE ARM4
1 - CON
2 - CONFIGURE ARM 2
3 - CONFIGURE ARM 3
PRESS ENTER TO SELECT
1 - CONFIGURE ARM 1
ARM N 3N
- ALARM SETUP
- PULSED ADDITIVE RECIPE
- CON
- SETUP
- FLOW CONTROL
PRESS ENTER TO SELECT
- NAME/DESCRIP/HM CLASS
ARM N 3N
- ALARM SETUP
- ADDITIVE SETUP
- CON
- SETUP
- FLOW CONTROL
PRESS ENTER TO SELECT
- NAME