System (2)
4 - 28 Model 1010 Application Pack CB Part No.: 4418024 - Rev. 1
Programming Manual
Constraints: Only if Selected Message = Custom
Not available for Emergency Stop.
This menu is available if loading effect for the selected input is not
NONE.
Top Line (20 Character alphanumeric Message)
Permissive Reconnect
Message Edit Line 2
A custom reconnect message of 20 characters may be composed for
display on the bottom line on the screen message area. The message is
displayed during the loading process if the permissive becomes inactive
after the START button is pressed.
Constraints: Only if Selected Message = Custom
Not for Emergency Stop
This menu is available if loading effect for the selected input is not
NONE.
Bottom Line (20 Character alphanumeric Message)
Permissive Error
Message Edit Line 1
A custom reconnect message of 20 characters may be composed for
display on the top line on the screen message area. The message is
displayed during the loading process if reconnect prompt is not
addressed within the timeout period or if permissive with terminate
loading effect is disconnected.
Constraints: Only if Selected Message = Custom
Not for Emergency Stop.
This menu is available if loading effect for the selected input is not
NONE.
Top Line (20 Character alphanumeric Message)
4.8.6 System Messages
Use the System Messages sub-menu to select message from either the
fixed or custom message list for that system input.
Select one of the following options:
System Input 1
System Input 2
System Input 3
System Input 4
System Input 5
System Input 6
To Next Page
Loading...
