Authorisation Entry Mode
10 - 8 Model 1010 Application Pack CB Part No.: 4418024 - Rev. 1
Programming Manual
SCREEN 10-9 Authorisation Type = PIN
SCREEN 10-10 Authorisation Type = TOUCH KEY
SCREEN 10-11 Authorisation Type = RF ID
SCREEN 10-12 Authorisation Type = NexWatch
Change the current ID number by one of the following methods:
• Press Cancel to remove the current ID Number.
• Touch the ID media onto the ID reader
5. Press the Enter key to save the currently displayed ID number.
The instrument displays the index number and ID. Return to step 2.
EDIT PIN #N
XXXX
EDIT PIN #N
XXXX
ENTER TOUCH #N
============
ENTER TOUCH #N
============
ENTER FACILITY & CARD #N
============
ENTER FACILITY & CARD #N
============
ENTER NEXKEY #NENTER NEXKEY #N
To Next Page
Loading...
