Transferring data between local and remote controller points using OPC Integrator
It is important to note that OPC Integrator groups must be configured so that controller writes
are performed on the local server. That is, all destination items must be part of a controller that
is connected to the local server.
This architecture supports Experion server redundancy.
Transferring data between Experion and a third-party OPC server
In this topology, OPC Integrator interfaces with the local Experion OPC server and a remote
third-party OPC server connected to another system to achieve data transfers between other
OPC connected systems and Experion.
Exchanging data with other applications
Honeywell 2017 119
To Next Page
Loading...
