Honeywell FUSION - Day of the Week; Creating a Simple Schedule (by Example)

SETUP OPTIONS
5–15
5.6 RECORDING SCHEDULE, CONTINUED
5.6.1 DAY OF THE WEEK
The Day of Week is simply the day of the week for which the schedule is being edited.
If WED is checked, Wednesday’s schedule is being edited.
The Single Day Selection button allows selection of multiple days at once.
By selecting the Single Day Selection button placing multiple checks in the boxes is
allowed, thereby selecting multiple days simultaneously.
5.6.2 CREATING A SIMPLE SCHEDULE (BY EXAMPLE)
Creating schedules is easy with a little experience.
In the following example, the steps for creating a simple schedule for cameras 1 to 4
are detailed.
The schedule will be as follows:
1. MON-FRI (9AM-5:59PM) all 4 cameras will record using MOTION recording.
2. MON-FRI (6PM-8:95AM) all 4 cameras will record using CONTINUOUS recording.
3. SAT-SUN (12AM-11:59PM) all 4 cameras will record using MOTION recording.
To do this, a total of 3 schedules will be created.