GasAlertMicro 5/PID/IR
User Manual
14
Self-test Successful: If successful, the following screen displays.
Self-test Unsuccessful: If a sensor fails the self-test, a warning
displays indicating which sensor(s) has failed.
6. If correction factors are set in the user options, the LEL or PID
(custom) correction factors display.
7. The TWA, STEL, low, and high alarm setpoints then
display in the following order (left to right).
Note
The alarm setpoints may vary by region. Refer to Resetting
Gas Alarm Setpoints.
TWA STEL
Low High
To Next Page
Loading...
