65
GasAlertMicro 5/PID/IR
MMC/SD Card Troubleshooting
5. Activate the detector. The MMC/SD card is automatically for-
matted during the startup self-test.
Figure 12. Inserting/Removing the MMC/SD Card
MMC/SD Card Troubleshooting
The MMC/SD card is not required for operation in detectors equipped
with datalogging. However, the following two screens display if the card
is not inserted during startup.
A new MMC/SD card is automatically formatted when it is inserted in the
detector. When the detector is activated, it begins the self-test and then
displays the following screen.
To Next Page
Loading...
