Honeywell GasAlertMicro 5 - Alarms and Monitoring; Alarm Descriptions

37
GasAlertMicro 5/PID/IR
Alarms
Alarms
The following table describes the detector alarms and corresponding screens.
• During an alarm condition, the detector activates the backlight and displays the current ambient gas reading.
• If more than one type or level of alarm exists simultaneously, a multi alarm results.
• To change the factory-set alarm setpoints, refer to Calibration and Setting Alarm Setpoints
.
Table 7. Alarms
Alarms Screen` Alarms Screen
Low Alarm
• Fast beep
•Slow flash
•
L and gas type flash
• Vibrator alarm activates
TWA Alarm
• Fast beep
•Slow flash
• L and gas type flash
• Vibrator alarm activates
High Alarm
• Constant beep
• Fast flash
•
L and gas type flash
• Vibrator alarm activates
STEL Alarm
• Constant beep
• Fast flash
• L and gas type flash
• Vibrator alarm activates