Honeywell GasAlertMicro 5 - Photoionization Detector (PID); Clean or Replace the Lamp

77
GasAlertMicro 5/PID/IR
Maintenance
Photoionization Detector (PID)
Clean or Replace the Lamp
The PID lamp must be cleaned regularly. Use only the cleaning kit
that is supplied by BW Technologies by Honeywell.
To clean the PID lamp, refer to the illustrations and procedures that
are provided with the PID Lamp Cleaning Kit. To order the kit, refer
to Replacement Parts and Accessories
.
a Caution
To ensure proper maintenance and continued accurate
readings from the sensor, use only the PID Lamp
Cleaning Kit that is supplied by BW Technologies by
Honeywell.
Table 20. Parts of the PID sensor
Figure 16. Parts of the PID
Item Description
1 PID sensor
2 Diffusion barrier
3 Sensor cover
4 Electrode stack
5
Lamp