21
GasAlertMicro 5/PID/IR
User Options Menu
1. To enter the user options menu, press and hold G and H
simultaneously as the detector beeps and flashes to the cor-
responding countdown.
G and
H must be held down for the entire countdown to
access the user options menu.
When the countdown is complete, the revision/serial number
screen displays followed by the options menu.
2. To scroll through the options, press H or G. When the cursor
displays beside the desired option, press C.
3. To return to the previous menu, scroll to Back and press C or
press A.
Note
If no pushbuttons are pressed within 20 seconds, the detector
returns to normal operation.
Exit User Options Menu
To exit the user options menu and return to normal operation, scroll to
Exit and press C. The following screen displays.
The user options menu can also be exited by repeatedly pressing A
until the detector returns to normal operation.
Options Menu
Each feature within the Options menu is enabled/disabled by pressing
C to toggle between the checkboxes.
Enabled
Disabled
To Next Page
Loading...
