Honeywell GasAlertMicro 5 - Backlight; Confidence Beep; Due-Lock; Latched Alarms

GasAlertMicro 5/PID/IR
User Manual
22
Backlight
Confidence Beep
Due-Lock
Latched Alarms
The Backlght (backlight) option enables
the LCD backlight to activate automatically
in low-light conditions.
If disabled, the backlight activates only
when the detector is in alarm mode.
Note
In stealth mode, the backlight does
not activate.
The detector is shipped with the Backlght
option enabled.
The Confibeep (confidence beep) option
provides continuous confirmation that the
detector is operating properly. When confi-
dence beep is enabled, the audible alarm
beeps once every 10 seconds.
Note
Confidence beep is automatically
disabled during a low battery alarm.
The detector is shipped with the
Confibeep option disabled.
If the Due-lock (calibration user lockout)
option is enabled and a sensor is overdue
for calibration upon startup, the passcode
must be entered to access normal opera-
tion.
Note
If the correct passcode is not
entered, the detector deactivates.
The detector is shipped with the Due-lock
option disabled.
If enabled, the Latch (latched alarms)
option causes the low and high gas alarms
(audible, visual, and vibrator) to persist
until they are acknowledged. Press C to
acknowledge the alarm.
After the alarm is acknowledged, it reacti-
vates every 30 seconds until the gas
concentration is below the setpoint.
The detector is shipped with the Latch
option disabled.