Honeywell H4W2PER2 Series User Manual

Configuring Video Analytics Settings
55
HEW4PER2V/HEW2PER2V/H4W2PER2V/HBW2PER2V.
Period
The video tampering function is activated during the specified period.
See Configuring the Alarm Period on page 51.
You can configure up to six periods per day. Select a date. If you do
not select a date, the current setup will be applied to today only.
You can select All to apply the alarm period to the whole week.
Click Save to exit.
Record
If Record is enabled, a camera tampering event can activate
recording.
Record Delay
The system will wait for the specified time before it begins recording.
Select from 10s to 300s.
Relay-out
Select the Relay-out check box, and when alarm is triggered, the
system interacts with the linked alarm devices.
Alarm Delay
The Alarm linkage keeps running for the configured time after alarm is
ended.
Send Email When enabled, the system sends an email alert when an alarm occurs.
Snapshot
When enabled, the system attaches a snapshot to an email alert when
an alarm occurs.
3. Click Save.
Configuring Scene Changing Settings
1. Go to Setup  Video Analytics  Video Detection  Scene Changing.
2. Configure the parameters.
Figure 7-5 Scene Changing

Honeywell H4W2PER2 Series Specifications

General

Brand	Honeywell
Model	H4W2PER2 Series
Category	Security Camera
Language	English