Honeywell H4W2PER2 Series - Restoring Default Settings; Figure 9-11 Modify User; Figure 9-12 Default

Performance Series IP Camera Software Configuration Guide
78
Click to modify user.
Figure 9-11 Modify User
Note You can only change the password of the admin.
The methods of changing password vary with different account.
• Login with admin account, you can change password through Old Password and Admin
Account.
• The password of admin account can be changed through Old Password only.
• Login with non-admin account (an added account with the permission of user
management), you can change password through Old Password.
• Old Password: Change the password through entering the old password to be changed,
and then the new password.
• Admin Account: Change the password through entering the admin password, and then
the new password for the non-admin account to be changed.
Click to delete user.
Note Admin account cannot be deleted.
Restoring Default Settings
Go to Setup System Setup Default.
Figure 9-12 Default
To reset the camera, click:
• Default – Recover configurations to default except network IP address and user