Configuring System Settings
73
Date and Time
Figure 9-2 Date and Time Configuration
Table 9-2 Date and Time Configurations
Parameter Function
Date Format Select a date format from the drop-down list.
Time Format Select a time format, either 24-hour or 12-hour.
Time Zone Select the time zone for the camera.
Current Time Set it to set the system’s time. Click Save to activate this time.
Sync PC Click to sync the camera’s time with your PC’s time.
DST
Set when Daylight Saving Time begins and ends. Select Date or Week
and then set the Start Time and End Time.
NTP
Click to enable synchronization with a Network Time Protocol (NTP)
server.
Server Configure the NTP server.
Port Configure the port for the NTP server.
Interval Configure the interval of a PC.
Account Setup
Account
Go to Setup System Setup Account Account.