EasyManuals Logo

Honeywell HRHT4162 Remote User Guide

Honeywell HRHT4162
112 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #45 background imageLoading...
Page #45 background image
Configuration | 45
800-22740 - A - 02-2017
Configuring the Connection
Click Connection in the Network configuration interface to open the Connection configuration
interface.
Figure 3-11 Connection Configuration Interface
IP Address 1. Use your PC’s keyboard to enter the IP address.
2. Set the Subnet mask and Default gateway.
Note The IP address, subnet mask, and default gateway are
not configurable when the Mode is set to DHCP.
Preferred DNS Enter the DNS IP address.
Alternate DNS Enter an alternate DNS IP address.
Note For the IPv6 version IP address, the Preferred DNS and Alternate DNS shall be no
more the 128 digits. They also can not be left blank.
LAN Download Enable this function so that the system can process the
downloaded data first. The download speed is 1.5X or 2.0X of
the normal speed.
Table 3-5 TCP/IP Configurations
Configuration Description
Table 3-6 Network Connection Configurations
Configuration Description
Max Connection The maximum Web connection for the same DVR. The value ranges
from 1 to 120. The default is 120.
TCP Port The default is 37777. You can enter the actual port number, if
necessary.
UDP Port The default is 37778. You can enter the actual port number, if
necessary.
HTTP Port The default is 80. You can enter the actual port number, if necessary.
RTSP Port The default is 554.

Table of Contents

Other manuals for Honeywell HRHT4162

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Honeywell HRHT4162 and is the answer not in the manual?

Honeywell HRHT4162 Specifications

General IconGeneral
BrandHoneywell
ModelHRHT4162
CategoryDVR
LanguageEnglish

Related product manuals