Configuration | 85
800-22740 - A - 02-2017
Configuring System Settings
Configuring General Settings
General Settings
Figure 3-48 General Settings Interface
Table 3-21 General Settings Configurations
Configuration Description
Device Name Enter a device name.
Device No. Enter a channel number.
Language Select a GUI language from the drop-down list.
Note You need to reboot the device/DVR to activate this
change.
Video Standard Select the video standard, either NTSC or PAL.
HDD Full Select what happens when the DVR’s storage is full. Select
either Stop Recording or OverWrite.
Stop Recording: If the HDD is full, the DVR stops recording.
OverWrite: If the currently working HDD is full and the next
HDD is also full, the DVR overwrites the previous files.
Pack Mode Select the recording duration. Select from 1 to 60 minutes.
The default is 60 minutes.
Auto Logout Configure how long before the DVR automatically logs out.
Enter a value between 1 to 60 minutes. The default is 60
minutes.
To Next Page
Loading...
Need help?
General