Configuration | 83
800-22740 - A - 02-2017
3. Configure the schedule, then click Save.
4. Click Save to save the settings, and then click Save to save the Schedule configuration.
Configuring Local Storage
Click HDD MANAGE in the Storage selection tree to open the Local Storage configuration
interface.
The Local Storage interface shows HDD information. You can also configure read-only,
read-write, redundancy (if there is more than one HDD), and format settings.
Figure 3-46 Local Storage Interface
Table 3-19 Schedule Configurations
Configuration Description
Channel Select a channel from the drop-down list.
Regular Check to enable the Regular schedule mode.
Motion Check to enable the Motion Detection schedule mode.
Alarm Check to enable the Alarm mode.
MD&Alarm Check to enable the MD&Alarm mode.
Intel Check to enable Face Detection mode.
To Next Page
Loading...
Need help?
General