Honeywell MPA1 User Manual

www.honeywell.com/security
30 |
MPA1 User Guide
The General section allows the user to:
• Configure the panel's name
• View the active firmware version
• Reset the panel
• View the panel type
• View the last boot time of the panel
Other fields in the Panel Configuration > Settings > General section are Firmware Version,
Reset, Panel Type, and Boot Time.
Configuring Time Management
In the Panel Configuration page, you can configure the following time-related settings:
• Set the current time.
Scroll down to the Time Management section.
Figure 2-12 Time Management Section
Configuring the Current Panel Time
Between the Settings tab and the Host/Loop Communications tab, you can configure the
following for the current panel time:
Settings Tab
• Specify the time format (12 hour/24 hour).
• Set a new date.
• Set a new time.
• Set the geographic time zone.
• Enable a time server, and then specify the IP address of the time server being used.
• Specify the update interval.
• Force a time synchronization between the panel and the time server.
Host/Loop Communications Tab
• Synchronizes the primary panel's time with the secondary panels.

Honeywell MPA1 Specifications

General

Brand	Honeywell
Model	MPA1
Category	IP Access Controllers
Language	English