Honeywell MPA1 - Monitoring Output Group

| 83
Document 800-26311_ A - February 2020
Figure 3-4 Device Management Window - Auxiliary Connections - Outputs
Note The Output Status screen dynamically refreshes when the output status
changes.
Monitoring Output Group
Configuring Output Groups
Before you can monitor output groups, they must first be configured. See Configuring
Panel I/O and Groups on page 52), and select Group when configuring the output.
Navigating to the Auxiliary Connections-Output Groups tab:
Click to open the menu, then click Device Management > Auxiliary Connections >
Output Groups.
Table 3-2 Output Management Settings
Field Description
Energized Click to energize an output for an indefinite period of time.
De-energized Click to de-energize an output for an indefinite period of time
Pulse Click to pulse an output for the configured period of time.
Restore to Time Zone Click to reset the output to follow its configured time zone.