www.honeywell.com/security
52 |
MPA1 User Guide
4. Click Save.
Configuring Panel I/O and Groups
To view a configuration of a group of outputs, click Group and select the group number
from the drop-down list. The group configuration screen appears. Note that you can only
view the group configuration from this screen.
The edit the Group configuration, go to Panel Configuration > Outputs > Groups.
Figure 2-28 Door Output Group
Configuring Inputs
The Inputs tab enables you to:
• Enter a name for the input.
• Configure input modes, including the state.
• Configure shunt and Debounce settings.
• Configure input schedules.
1. Navigate to the Input tab:
• Click Panel Configuration > Inputs, or
• Click Panels in the Dashboard.
To Next Page
Loading...
