Honeywell MPA1 - Configuring People and Cards; Configuring People

| 69
Document 800-26311_ A - April 2020
Figure 2-39 Deleting a Person
2. Click the delete icon . A confirmation message appears.
3. Click OK to confirm the deletion.
Configuring Cards
A card is encoded with a unique number and the person’s access group grants rights to
access system resources. For example, in addition to its unique number, a card allows the
person access to certain doors during a certain time of day.
The Cards configuration interface allows you to:
• Create cards encoded with the following information:
• Card Number(s)
• Card Type
• Personal Identification Number (PIN)
• Trace
• Expiration Date
• Use Limit
• Note
Note People can have more than one card associated to them.
Navigate to the Cards tab on the People & Cards window:
• Click Cards in the Dashboard to access the People & Cards interface, or
• Click Configuration in the Menu, then click People & Access > People & Cards >
Cards.