| 43
Document 800-26311_ A - April 2020
Figure 2-23 Configure your Spaces Tab
2. Click Configure your Spaces to expand the configured spaces, then click a Space to
open it, then click on a door in that space to select it.
Figure 2-24 Door Configurations
Configuring Door Reader Settings
The Reader settings tab allows you to configure the following settings for both Readers
A(IN) and B(OUT) for each door:
• Door Name
• Access Modes and Schedules
• Anti-Passback (enable/disable)
• Duress Output
To Next Page
Loading...
