www.honeywell.com/security
64 |
MPA1 User Guide
Creating Interlocks
1. Click to open the Create Interlock window.
Figure 2-34 Create Interlocks Interface
2. Enter a name for the new Interlock.
3. Select configurations for the Triggers (Input, Output, or Group), Reaction (Input,
Output, or Group), Alarm Action, and Normalcy (the state to which the trigger
returns).
Configuration Description
Triggers Specifies the input, output, or output group for which a change of
state will cause a reaction from another input, output, or group.
Use the drop-down list to specify the number of the input or
output.
Reaction Specifies the input, output, or output group that will react to a
change of state from the trigger point. Use the drop-down list to
specify the number of the input or output.
To Next Page
Loading...
