Honeywell MPA2C3 Installation Manual

102 MPA2C3 Installation Guide
Note: When you use the DIP switches to reset a panel to the factory default values, the Event
History is lost and any customized databases are removed, and the panel is reset with
the factory default database.
Table 3-13 DIP Switch 2 (SW2) Settings
The 4-door license is required for the 3-door or 4-door configuration.
Table 3-14 DIP Switch 3 (SW3) Settings

Honeywell MPA2C3 Specifications

General

Brand	Honeywell
Model	MPA2C3
Category	IP Access Controllers
Language	English