Honeywell MPA2C3 Installation Manual

Name: Honeywell MPA2C3
Brand: Honeywell
Rating: 5 (1 reviews)

183 pages

To Next Page

To Previous Page

MPA2C3 Installation Guide 103

Resetting to the Factory Default

1. Make a note of the existing settings on DIP switches.

2. While the panel is powered up, turn all DIP switches to the OFF position.

3. Restart the panel, And the Heartbeat LED flickers fast.

4. Set the DIP switches back to their original positions.

5. Restart the panel. The Heartbeat LED should flash normal. The panel is now

reset to the original factory default values.

Note: Address 0 is not a valid setting.

Other manuals for Honeywell MPA2C3

Need help?

Do you have a question about the Honeywell MPA2C3 and is the answer not in the manual?

General