Honeywell MPA2C3 Installation Manual

110 MPA2C3 Installation Guide
Figure 3-40 Ready to Install the Program
1. Click Install to initiate the installation.
2. When the installation is complete, the closing screen
3. appears:
Figure 3-41 InstallShield Wizard Completed
1. Click Finish.
2. Connect
3. the computer to the MPA2C3 controller with a Type-A to Type-C USB cable or a
Type-C to Type-C USB cable.

Honeywell MPA2C3 Specifications

General

Brand	Honeywell
Model	MPA2C3
Category	IP Access Controllers
Language	English