Honeywell Sensepoint XCD User Manual

Sensepoint XCD Technical Manual SPXCDHMANEN Issue 15
3
Duct Mounting Drawing 66
Collecting Cone Drawing 67
Mounting Bolt Assy Drawing 68
Mounting Bracket Drawing 69
17. Certification 70
ATEX/UKEX/IECEx Special Conditions for Safe Use 70
Standard and certification 70
Sensepoint XCD ATEX/UKEX Name Plate 71
Sensepoint XCD UL Name Plate 71
Sensepoint XCD Warning Tag 72
Sensor Cartridges Label 73
Special Conditions for Use in European Gas Performance Approval 73
18. Cross Interference and Cross Calibration 74
Cross Interference Table for Toxic and Oxygen 74
Cross Calibration Flammable Gas Detector 75
Meter Multiplication Factors for Sensepoint XCD-IR Propane 78
Appendix A - Modbus® Protocol A-2 79
A.1 Modbus and the Sensepoint XCD 79
A.2 Modbus Registers 80
A.3 User Configurable Parameter List 81
A.4 Ranges of User Configurable Parameter 82
REVISION HISTORY
Rev.
ECO No.
Date
Comment
12
HAA190090
Mar 2020
13
ECN-00210131
May 2022
14
ECN-00230026
May 2023
15
ECN-00230006
Nov 2023

Honeywell Sensepoint XCD Specifications

General

Type	Fixed Gas Detector
Ingress Protection	IP66/67
Display	LCD
Output	4-20 mA, Relay
Certification	ATEX, IECEx
Sensor Type	Electrochemical, Infrared
Humidity	0 to 99% RH (non-condensing)
Material	Stainless Steel
Detection Principle	Depends on Sensor Type
Power Supply	24 VDC nominal (17-32 VDC)