Honeywell Touchpoint Plus Technical Handbook

Configurable Parameter Reference Guide
MAN0984_Iss 4_01/19 Touchpoint Plus
Pt. No. 3011M5001 145 Technical Handbook
Parameter Name
Parameter Description
Applies
to
Read/
Write
Range
Default Value
Remark
Maintainer
Password
Password for Access Level Maintainer
System
R/W
35 chars
TPPL
Admin Password
Password for Access Level Admin
System
R/W
35 chars
TPPL
Web Operator
password
Password for Access Level Web Operator
System
R/W
35 chars
TPPL
Service Contact
Service contact
System
R/W
120 chars
tpp@honeywell.c
om
System Label
System label
System
R/W
50 chars
TPPL
Home Screen
Home Screen types
System
R/W
list, tile, sum
List(0)
Enable Remote
Inhibit
Enable/disable Remote inhibit
System
R/W
Enable/Disable
Disable(0)
Remote Inhibit State
Get Remote inhibit state
System
R/W
Open/Close
Open(0)
Normal Open(0), Normal
Close(1)
Menu Timeout
Set Menu time out
System
R/W
5~100
90
seconds
Auto Logout
Timeout
Set auto logout time for menu
System
R/W
15~100
15
minutes
Dedicated Alarm1
Set an alarm event to Dedicated Alarm
output #1
System
R/W
Alarm1/Alarm2
/Alarm3
0 (Alarm1)
Dedicated Alarm2
Set an alarm event to Dedicated Alarm
output #2
System
R/W
Alarm1/Alarm2
/Alarm3
1 (Alarm2)
Enable Remote
reset/ack
Remote reset enable/disable
System
R/W
Enable/Disable
Disable
Gas log Interval
Gas log interval
System
R/W
0~600
15
0: Disable, second
Gas log Threshold
Gas log Threshold
System
R/W
0.1~2.0
0
%FS
0 means that gas log will be
stored every log interval.
Buzzer Enable
Buzzer enable/disable
System
R/W
Enable/Disable
Disable

Honeywell Touchpoint Plus Specifications

General

Mounting	Panel
Communication	Ethernet
Communication Ports	1 x Ethernet, 2 x USB
Power Supply	24 VDC
Enclosure Rating	IP65 (front)