Insert the smaller end of the cable to the charger/accessory jack at the bottom of the phone.
Insert the USB end of the cable into an available USB port on your computer. You may
need to remove the USB cable from the charging head to access it.
2. Pull down the status bar to display the notification panel. Tap Charging this device via USB,
you will see either Use USB for File Transfer, USB tethering, PTP or No data transfer.
The files on your phone can now be accessed via your computer.
For most transfers, you'll want to use File Transfer.
3. On your computer, navigate to the detected device (such as through the My Computer menu)
and open it.
4. If available, select a drive (SD card or Internal shared storage).
5. Select a folder (for example, Music for songs and albums) and copy files to it from your computer.
6. When you are done, disconnect your phone from your computer.
The transferred files are now saved to your phone or SD card.
Wi-Fi
Wi-Fi provides wireless Internet access over distances of up to 300 feet. To use your phone’s Wi-Fi,
you need access to a wireless access point or “hotspot.”
The availability and range of the Wi-Fi signal depends on a number of factors, including infrastructure
and other objects through which the signal passes.
Turn Wi-Fi On and Connect to a Wireless Network
Use the wireless and networks setting menu to enable your phone’s Wi-Fi radio and connect to an
available Wi-Fi network.
1. From home, swipe up and tap Settings
2. Tap Network & internet > Wi-Fi.
.
The Wi-Fi settings menu appears.
To Next Page
Loading...
